Digital Signage, Display Solutions, LED Accessories
iSecure LH-200-5P
iSecure LH-200-5P LED Display Switching Power Supply – 230VAC Input – 5V 40A 200W Output For LED Cabinets, Receiving Cards & Controllers
SKU: LH-200-5P
Categories: Digital Signage, Display Solutions, LED Accessories
Tags: Display, Indoor, iSecure, LED, LED Power Supply, Power Supply
iSecure LH-200-5P LED Display Switching Power Supply – 230VAC Input – 5V 40A 200W Output For LED Cabinets, Receiving Cards & Controllers
It can be applied to Led display, LED indicator light and other Led display fields. This product is ultra-thin design, with a height of only 30mm, and can adapt to a variety of box size requirements. Super high efficiency, compact shell design and good heat dissipation ensure the long-term stable work.
Key Features :-
- Standard slim case, 30mm height
- Input Volt: 176~264VAC
- Working temp: -40℃~ 70℃ (refer to derating curve)
- Fan-less, air-cooled
- Protection: Short circuit/Overload
- 100% aging test
- High efficiency & reliability
- 2 years warranty
| Model | LH-200- 5P | ||||||
| Input | Input voltage | 176～264VAC | |||||
| Input current | 240VAC/3A | ||||||
| Efficiency | ≥87% | ||||||
| Frequency range | 47～63HZ | ||||||
| Leakage current | <1.5mA/230VAC | ||||||
| Inrush current | Cold start, 50A/230VAC | ||||||
| PFC | – | ||||||
| Output | DC voltage | 5V | |||||
| Rated current | 40A | ||||||
| Rated power | 200W | ||||||
| Voltage ADJ. range | — | ||||||
| Ripple & Noise | ＜250mVp-p | ||||||
| Setup, rise | 2500ms，50ms/230VAC at full load | ||||||
| hold up time | 5ms/230VAC at full load | ||||||
| Line regulation | ±0.5% | ||||||
| Load regulation | ±2.0% | ||||||
| Voltage tolerance | ±3.0% | ||||||
| EMC | Interrupt, fall | Compliance to: EN6100-4-11/C | |||||
| Vibration | 10~500Hz, 2G 10min. /1 cycle, 6 cycle each X, Y, Z axes | ||||||
| Shock | 20G/11mS pulse, 3 times at each X, Y, Z axes | ||||||
| Safety | Safety standard | Compliance to: GB4943/UL60950 | |||||
| Withstand voltage | I/P-O/P: 3.0KVac/10mA; I/P-CASE: 1.5KVac/10mA; O/P-CASE: 0.5KVAC/10mA 1min for | ||||||
| Isolation resistance | I/P-O/P: 100M ohms; I/P-Case: 100M ohms; O/P-Case: 100M ohms | ||||||
| Protection | Over voltage | / | |||||
| Over load | 110～150% rated Hiccup mode, auto-recovery | ||||||
| Over current | 48-76A error eliminated, auto-recovery | ||||||
| Short circuit | Hiccup mode, auto-recovery | ||||||
| Environment | Working Temp&humidity | -40~70℃ 20%~95%RH non-condensing （Refer to Derating Curve） | |||||
| Storage Temp&humidity | -40℃~85℃; 10%~95%RH non-condensing | ||||||
| Vibration | 10~500Hz, 2G，10min/1 cycle, 60min. each along X, Y, Z axes | ||||||
| Impact | 20G，last 11mS，3 impacts along X, y and Z axes | ||||||
| Altitude | the ambient temperature derating of 0.6 ℃/100m for operating altitude higher | ||||||
| Reliability | MTBF | Under 25℃: 100000Hrs, MIL-217 Method 2 | |||||
| Others | Size | 190*82*30 mm（L*W*H） | |||||
| Packing | 0.34Kg/pc, 40pcs/ctn，14.5KG/ctn | ||||||
| Cold mode | ☑free air convection □with fan | ||||||
| More options | □ PCB double side conformal coating □ Terminal with cover □ low temp start | ||||||
| *In order to extend the service life, it is recommended to leave 30% more allowance when loading. For example, if the equipment needs 100W power, please choose the power supply over 130W. *Ripple&noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. *All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. *the auxiliary heat dissipation of aluminum plate with an area of 300 * 300 * 5mm must be used when full load working. *The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. All our EMC tests are carried out by mounting samples on metal plates. |
|||||||